Quick notes
- With the right tools and a little know-how, you can easily replace the spray arm and get your dishwasher back up and running in no time.
- To remove the upper spray arm, first use a Phillips head screwdriver to remove the screw that is holding it in place.
A dishwasher is an essential appliance in any modern kitchen. It saves time and effort by cleaning dishes quickly and efficiently. However, like all appliances, dishwashers can experience problems from time to time. One common issue is a faulty upper spray arm. If your GE dishwasher’s upper spray arm is not spinning or is not cleaning dishes properly, it may need to be replaced.
Replacing a GE dishwasher upper spray arm is a relatively simple task that can be completed in about 30 minutes. With the right tools and a little know-how, you can easily replace the spray arm and get your dishwasher back up and running in no time.
Tools and Materials Needed
- Phillips head screwdriver
- Flat head screwdriver
- New GE dishwasher upper spray arm
- Flashlight (optional)
Step-by-Step Guide
1. Turn off the power to the dishwasher.
Before you begin working on the dishwasher, make sure to turn off the power at the circuit breaker or fuse box. This will prevent you from getting shocked.
2. Open the dishwasher door.
Once the power is turned off, open the dishwasher door.
3. Locate the upper spray arm.
The upper spray arm is located in the top center of the dishwasher. It is a round, plastic piece with several holes in it.
4. Remove the upper spray arm.
To remove the upper spray arm, first use a Phillips head screwdriver to remove the screw that is holding it in place. Then, use a flat head screwdriver to pry the spray arm off of the dishwasher. Be careful not to damage the dishwasher when you are prying off the spray arm.
5. Inspect the upper spray arm.
Once you have removed the upper spray arm, inspect it for damage. Look for any cracks, leaks, or other signs of damage. If the spray arm is damaged, it will need to be replaced.
6. Install the new upper spray arm.
To install the new upper spray arm, first insert it into the dishwasher. Then, use a Phillips head screwdriver to secure the spray arm in place.
7. Test the upper spray arm.
Once the new upper spray arm is installed, turn on the dishwasher and run a test cycle. Make sure that the spray arm is spinning properly and that it is cleaning the dishes.
8. Close the dishwasher door.
Once you are satisfied that the upper spray arm is working properly, close the dishwasher door.
Troubleshooting
If you are having trouble replacing the upper spray arm, here are a few troubleshooting tips:
- Make sure that you are using the correct replacement spray arm. There are different spray arms for different models of GE dishwashers.
- Make sure that the spray arm is installed correctly. The spray arm should be inserted into the dishwasher so that the holes are facing down.
- Make sure that the spray arm is not clogged. If the spray arm is clogged, it will not be able to spin properly. You can clean the spray arm by soaking it in a vinegar and water solution for 30 minutes.
- Make sure that the water pressure is turned on. If the water pressure is turned off, the dishwasher will not be able to spray water through the spray arm.
Conclusion
Replacing a GE dishwasher upper spray arm is a relatively simple task that can be completed in about 30 minutes. With the right tools and a little know-how, you can easily replace the spray arm and get your dishwasher back up and running in no time.