Essential Information
- – Use the adjustable wrench to turn the leveling feet clockwise to raise the dishwasher or counterclockwise to lower it.
- If your dishwasher has adjustable front feet, you can use a tape measure to ensure that the front and back of the dishwasher are level.
- A dishwasher that is not level may not drain properly, resulting in standing water in the bottom of the unit.
A properly leveled Bosch integrated dishwasher is essential for ensuring its optimal performance and longevity. An uneven dishwasher can cause a range of issues, including improper cleaning, excessive noise, and even potential damage to the unit. This comprehensive guide will provide you with step-by-step instructions on how to level your Bosch integrated dishwasher, ensuring it operates smoothly and efficiently.
Tools and Materials Required:
1. Adjustable wrench
2. Leveling feet (typically included with the dishwasher)
3. Spirit level (minimum length of 24 inches)
4. Screwdriver
5. Tape measure
6. Flashlight
Step-by-Step Leveling Instructions:
1. Prepare the Dishwasher:
– Turn off the water supply and disconnect the dishwasher from the power source.
– Open the dishwasher door and remove the lower dish rack.
– Place a towel or protective mat underneath the dishwasher to catch any water or debris.
2. Locate the Leveling Feet:
– Bosch integrated dishwashers typically have four leveling feet, one at each corner of the unit.
– The leveling feet are usually located behind the front panel or beneath the dishwasher.
– Refer to your dishwasher’s user manual for specific instructions on locating the leveling feet.
3. Adjust the Leveling Feet:
– Use the adjustable wrench to turn the leveling feet clockwise to raise the dishwasher or counterclockwise to lower it.
– Adjust the feet until the dishwasher is level from front to back and side to side.
– Use the spirit level to check the levelness of the dishwasher in both directions.
4. Secure the Leveling Feet:
– Once the dishwasher is level, tighten the locknuts on the leveling feet using the screwdriver.
– Ensure that the locknuts are snug to prevent the dishwasher from shifting out of level.
5. Reinstall the Dish Rack and Reconnect Utilities:
– Reinstall the lower dish rack into the dishwasher.
– Reconnect the water supply and power source to the dishwasher.
– Turn on the water supply and power the dishwasher back on.
Additional Tips:
- If your dishwasher has adjustable front feet, you can use a tape measure to ensure that the front and back of the dishwasher are level.
- If you have difficulty reaching the leveling feet, use a flashlight to illuminate the area.
- It’s a good idea to level your dishwasher periodically, especially if you notice any changes in its performance or if it’s been moved.
Troubleshooting Common Leveling Issues:
- Dishwasher is not draining properly: A dishwasher that is not level may not drain properly, resulting in standing water in the bottom of the unit.
- Dishwasher is noisy: An uneven dishwasher can cause excessive noise during operation.
- Dishwasher is leaking: A dishwasher that is not level may leak water from the door or底部.
Conclusion:
By following these step-by-step instructions, you can ensure that your Bosch integrated dishwasher is properly leveled, optimizing its performance and preventing potential issues. Regular maintenance and leveling can extend the lifespan of your dishwasher and keep it operating at its best.